Sensor

Low-voltage analog temperature sensors GX100 and GX101 are two digital temperature sensors with high precision, low power consumption, and can replace NTC/PTC thermistors, which can be used for temperature in communication, computer, consumer electronics, environment, industry and instrumentation applications Measurement. GX100 and GX101 can provide a temperature accuracy of ≤±0.5°C within the normal operating range of -40°C to +125°C, and have good temperature linearity. The rated operating voltage range of GX100 and GX101 is 2.7~5.5V, and the quiescent operating current is lower than 40μA during temperature conversion. The on-chip 12-bit ADC has a resolution as low as 0.0625°C. \nGX100 and GX101 adopt 2.9mm×1.6mm SOT-23(6) package, compatible with SMBus and I 2 C interface, with SMBus alarm function DFN iron cap

Can count, speed meter, proximity switch, replace dry reed switch

LM20 ±1.5°C Analog Output Temperature Sensor

Hall, Magnetic Switch, Latch Switch, Hall Sensing Chip

D-20; R25=5 Ω; ±20%; I=7A; K type/outside bent pin; CP wire 0.75mm; lead length 3.5mm; lead spacing 10.0mm; green silicone resin

Hall switch, unipolar, TO-92UAplug-in type, high sensitivity, the sensing distance of the same magnetic field strength can be increased by 1-10mm.

Plug-in gauge pressure, 0~1MPa, 0.5~4.5V/5V

D-11; R25=10 Ω; ±20%; I=3A; J type/inner bent pin; CP line 0.75mm; 15.0mmtaping; lead spacing 7.5mm; green silicone

High performance, low power consumption, dual output unipolar magnetic field detection Hall switch sensor, magnetic sensor, magnetoresistive switch sensor, angle sensor; magnetic encoding, 3D, speed, direction sensor IC, HFBP1010 package, dual output unipolar, 5HZ, 1.6uA

Type: Unipolar Switch Supply Voltage (V): 3.5~40 Power Consumption (mA): 6 ESD(KV): 4 Operating Temperature (℃): -40~125 Operating Point (Gs): 30 Release Point (Gs): 20 Output form: open collector