Logic device/transceiver/encoder

TMUX1208 Single-Channel, 8:1 General-Purpose Analog Multiplexer with 1.8-V Logic Control

4-Bit Dual Supply Bus Transceiver 16-UQFN -40 to 125 Automotive with 3-State Outputs and Independent Direction Control Inputs

The NB4L52 is a differential data and clock D flip-flop with differential asynchronous reset. The differential inputs incorporate internal 50 Ω termination resistors and accept LVPECL, LVCMOS, LVTTL, CML, or LVDS logic levels. When the clock transitions from low to high, data is transferred to the differential LVPECL output. Differential clock inputs allow the NB4L52 to also be used as a negative edge triggered device. The device is packaged in a small 3mm x 3mm 16-pin QFN package.

MM74HC175 high-speed D-type flip-flop with complementary output adopts advanced silicon gate CMOS technology to achieve high anti-interference and low power consumption of standard CMOS integrated circuits and the ability to drive 10 LS-TTL loads. MM74HC175 D input information is transferred to the Q and Q# outputs on the positive-going transition edge of the clock pulse. Each flip-flop is externally supplied with primary and supplementary inputs. All four flip-flops are controlled by a common clock and a common CLEAR. Clearing is accomplished by a negative pulse on the CLEAR input. All four Q outputs are cleared to logic