Logic device/transceiver/encoder

SN74HC374 Octal Edge D-Type Flip-Flop with 3-State Outputs

The MC74VHC1GT125 is a single-gate non-inverting buffer fabricated using silicon-gate CMOS technology. It achieves high-speed operation similar to an equivalent bipolar Schottky TTL while maintaining CMOS low power consumption. The MC74VHC1GT125 requires the 3-state control input (OE(bar)) to be set high to put the output in a high impedance state. The device input is compatible with TTL-type input thresholds, and the output has a full CMOS level output swing. Input protection circuitry on the device allows overvoltage tolerance on the inputs, enabling the device to be used as a logic level translator from 3.0V CMOS logic to 5.0V CMOS logic, or 1.8V CMOS logic to 3.0V CMOS logic, and Capable of running on high voltage power supplies. The MC74VHC1GT125 input structure provides protection when voltages up to 5.5V are applied regardless of the supply voltage. This allows the MC74VHC1GT125 to be used as an interface to 5V to 3V circuits. The output structure also provides protection when VCC = 0V. These input and output structures help prevent device damage due to supply voltage - input/output voltage mismatch, battery backup, hot insertion, etc.

Single 2-Input, 1.65V to 5.5V AND Gate 5-SC70 -40 to 125

The LVX138 is a high-speed 1/8 decoder/demultiplexer. This device is ideal for high speed bipolar memory chip select address decoding. Multiple inputs enable parallel expansion to 1/24 decoders using only three LVX138 devices, and parallel expansion to 1/32 decoders using four LVX138 devices and an inverter.

SN74LVC138A 3-Line to 8-Line Decoder/Demux

Type: Buffer, Non-Inverting Supply Voltage: 2V~6V Input Type: - Output Type: Tri-State Output Current Low (IOL): 7.8mA Output Current High (IOH): 7.8mA Operating Temperature: -40 ℃~+85℃

SN74LVC126A Quad Bus Buffer Gate with Three-State Outputs

74AC16244 16-bit buffer and line driver with three-state outputs

SN74HCT32 Quad 2-Input Positive-OR Gate

CD4027B CMOS Dual J-K Master/Slave Flip-Flop

The FXL5T244 is a configurable dual voltage supply converter for unidirectional voltage translation between two voltage levels. The device enables voltage translation between as high as 3.6V and as low as 1.1V. The input and OE# control pins track the VCCI level and the Y output tracks the VCCO level. Both input and output are suitable for accepting supply voltages from 1.1V to 3.6V. Unidirectional voltage translation between multiple voltage levels: 1.2V, 1.5V, 1.8V, 2.5V and 3.3V. The device will remain 3-stated until both VCCs reach active levels, allowing either VCC to power up first. The device also includes power shutdown control circuitry that puts the device in 3-state if either VCC is removed. A high level on the OE#E input places the output in a 3-state state, thereby disabling it.