Optocoupler/LED/nixie tube/photoelectric device

-

F3 red and green transparent common shade (Iv=R:500-700/YG:450-650mcd(Typ)@IF=20mA)

Meihua Electronics LED light-emitting diode LED SMD 2121 top light, white mist colloid, common anode indoor full-color RGB super bright red, green and blue three colors, voltage VF:R:1.7 - 2.5V@8mA/ G:2.5 - 3.1V@ 5mA/ B:2.5 - 3.1V@3mA, brightness Iv: R:55-93mcd@8mA/G:160-270mcd@5mA/B:19-31.8mcd@3mA, dominant wavelength λd: R:618-628nm@8mA /G:522-530nm@5mA/B:463-471nm@3mA, light angle: 110deg

Colloid: transparent / color: green hair green / specification: 3MM / voltage: 1.8-2.4 / brightness: 20-70 / wavelength: 565-575 / others: outgoing curved legs

The FODM8071 is a 3.3V/5V high-speed logic gate output optocoupler that supports isolated communication, enabling digital signals to be communicated between systems without conducting ground loops or hazardous voltages. It utilizes ON Semiconductor's proprietary coplanar encapsulation technology Optoplanar and optimized IC design to achieve high noise immunity with high common-mode rejection specified characteristics. This high-speed logic gate output optocoupler encapsulation contains a high-speed AlGaAs LED at the input coupled with a CMOS sense IC at the output in a compact 5-pin low profile enclosure. The detection IC contains an integrated photodiode, a high-speed transimpedance amplifier, and a voltage comparator with output driver. This CMOS technology coupled with high efficiency LEDs enables low power consumption combined with very high speed (60ns propagation delay, 20ns pulse width distortion).

50% IV viewing angle: 120°, color: dark red (627~639nm), test current: 20mA, mainly used in automotive applications, reliability test complies with AEC Q102

50% IV Viewing Angle: 120° Color: White Cx=0.32, Cy=0.33 (CIE1931), Qualification: Passed AEC-Q102 & IEC 60810 Reliability Test, Moisture Sensitivity Level-2. Mainly used in automotive applications.

50% IV Viewing Angle: 120° Color: Super Red (627~639nm), Qualification: Passed AEC-Q102 & IEC 60810 Reliability Test, Moisture Sensitivity Level-2. Mainly used in automotive applications.

50% IV Viewing Angle: 120° Color: White to Yellow Cx=0.56, Cy=0.42 (CIE1931), Qualification: Passed AEC-Q102 & IEC 60810 Reliability Test, Moisture Sensitivity Level-2. Mainly used in automotive applications.

Ultraviolet LED@@3535 UV ball head mold top 3535 purple light 385nm+radiation angle 120°

50% IV Viewing Angle: 120° Color: Yellow (590nm), Qualification: Passed AEC-Q102 & IEC 60810 Reliability Test, Moisture Sensitivity Level-2. Mainly used in automotive applications.