Optocoupler/LED/nixie tube/photoelectric device

The CNY17XM, CNY17FXM, and MOC810XM devices consist of a Gallium Arsenide infrared light-emitting diode coupled to an NPN phototransistor with dual-row plug-inencapsulation.

The FOD8321 is a 2.5A output current gate drive optocoupler for driving medium power IGBT/MOSFET. It is ideal for fast switching driving power IGBTs and MOSFETs used in motor control inverter applications as well as high performance power systems.

The FOD8480 and FOD8482 are low-power optocouplers that support isolated interfaces for Intelligent Power Modules (IPMs), transferring digital control signals from the controller to the IPM without conducting ground loops or hazardous voltages. The FOD848x family is a stretched body, 6-pin small plastic enclosure containing a gallium aluminum arsenide (AlGaAs) light emitting diode and an integrated high gain integrated high gain photodetector. The detector has a detector threshold with hysteresis. Hysteresis provides differential mode noise immunity, eliminating the possibility of output signal chatter. Its non-inverting output is designed as a totem pole and does not require any pull-up resistors. The FOD8482 has a low threshold input current IFLH of 3.0 mA maximum. The electrical and switching characteristics of the full FOD848x family are guaranteed over the extended industrial temperature range of -40°C to 100°C and a VDD range of 4.5 V to 30 V. Low IF and wide VDD range, compatible with TTL, LSTTL, and CMOS logic levels, and lower power consumption than other high-speed optocouplers.

The CNY17XM, CNY17FXM, and MOC810XM devices consist of a Gallium Arsenide infrared light-emitting diode coupled to an NPN phototransistor with dual-row plug-inencapsulation.

The FOD3182 is a 3-A output current, high-speed MOSFET gate driver optocoupler. It consists of a gallium aluminum arsenide (AlGaAs) light emitting diode (LED) optically coupled to a CMOS detector with a circuit power stage integrating PMOS and NMOS output power transistors. It is suitable for high frequency driving of power MOSFETs used in plasma display panels (PDP), motor control inverter applications and high performance DC-DC converters. The device is encapsulated in an 8-pin dual-wire inner case and is compatible with 260°C reflow processes for leadless soldering machine compliance.

LED Cool white light PD: 80mW IF: 5mA IV: 190mcd